MASTER VOLUME for phaseur fleur

METHOD 1: (moderate volume boost)

find the 2N5809 that goes to the output

replace 100k from 2n5809 base to ground with 47k

replace 2k7 from 2n5809 emmitter to ground with 1k

remove the wire from board out to on/off stomp (”on/off 1”)

run a wire from board out to volume pot (100k) lug 3

wire lug 1 to ground

wire lug 2 to a 1k resistor

wire the other end of the 1k resistor to on/off stomp (where board out used to go)

METHOD 2: (larger boost)

Same as method 1, except:

replace the 2k7 to ground with a 100 ohm (instead of a 1k)

replace the 4k7 from the collector to V+ with a 2k7

you still need to replace the 100k with a 47k and do all the wiring the same.