From mouser electronics:

1 x 2k trim pot [323-409H-2k]
6 x 100k linear pots [31CN501]
2 x 100k audio pot [31VA501]
1 x 1M pot [31CN601]
1 x 1k pot [31CN301]
10 x 5164-1400 @ .41 = 4.10 (knob covers)
1 x red LED [351-5100]
1 x LED clip [593-2800C]
1 x power jack [163-4302]
1 x power supply [412-109033]
1 x +9V voltage regulator [511-L7809CV]
1 x 330 ohm resistor, [291-330]
1 x 470 ohm resistor, [291-470]
6 x 1k resistor, [291-1k]
8 x 10k resistor, [291-10k]
8 x 47k resistor, [291-47k]
2 x 100k resistor, [291-100k]
6 x 220k resistor, [291-220k]
3 x 470k resistor, [291-470k]
3 x 1M resistor, [291-1M]
1 x 0.001uFcap [140-PF1H102K]
2 x 0.01uF cap [140-50Z5-103M]
2 x 0.1uF cap [21RZ310]
6 x 1uF cap [140-XRL25V1]
2 x 100uF cap [140-XRL25V100]
1 x 1/4" output jack [161-1804]
1 x 1/4" input jack [568-NYS234-3]
1 x 14 pin IC socket for TL074 [575-293314]
2 x 8 pin IC sockets for Tl072 and 4151 [575-293308]
1 x 2N5485 FET [610-2N5485]
1 x 074 quad opamp [511-TL074IN]
1 x 072 dual opamp [511-TL072IN]
1 x 4151 IC [513-NJM4151D]
1 x Si diode [583-1N4001]

From Small Bear Electronics:
1 x stomp switch 3PDT 

box
wire, 26 gauge (about 15 ft)