commonsound
kits ... forum ... about us ... contact ... license ... 4ms Pedals
 
Members Members   Search Search   FUDforum help FUDforum help   Register Register   Login Login   Home Home
Building How-to » Bend Matrix » Enclosure depth?
Enclosure depth? [message #2388] Mon, 28 December 2009 16:11 Go to next message
jooks is currently offline jooks
Messages: 21
Registered: December 2009
Location: sweden
Junior Member
I´m just about to order parts to build a bend matrix but have trouble finding a good enclosure. I found a really nice cheap one but it´s 12x10x2. Is 2" to shallow to fit? From pictures it seems the voltage regulaturs and jacks set the depth but it´s hard to tell..

Really looking forward to build this!! For me it has opened up alot of new thinking in musicmaking. Will use it for my modular synth, some random sequencing of diy midi synths and effect chains.
Report message to a moderator
Re: Enclosure depth? [message #2411] Fri, 08 January 2010 09:45 Go to previous messageGo to next message
dann is currently offline dann
Messages: 829
Registered: December 2002
Location: Austin TX
Senior Member
10x12x2" is what I use, mouser#546-1444-29

I think the spec page in the manual has an error, it says 10x12x3! (oh well no harm done)
Report message to a moderator
Re: Enclosure depth? [message #2416] Wed, 27 January 2010 02:59 Go to previous messageGo to next message
jooks is currently offline jooks
Messages: 21
Registered: December 2009
Location: sweden
Junior Member
Thanks! That´s the one I was looking at.

I´d also like to ask if it matters what diodes to use? I have 1N914/1N4148 and also 1N4001. Which one is prefered?

Any chance of sharing schematics for the trigger inputs mod? I´d love to have those Smile
Report message to a moderator
Re: Enclosure depth? [message #2417] Wed, 27 January 2010 09:11 Go to previous messageGo to next message
dann is currently offline dann
Messages: 829
Registered: December 2002
Location: Austin TX
Senior Member
any Si diode will be fine, 1N4001 or 1N914 are good


Sure, I can post the trigger mod schematic. It's copied from the triwave's trigger mod, but run into a shift register so it can interface on the 74HC165 bus...
Report message to a moderator
Re: Enclosure depth? [message #2427] Thu, 28 January 2010 05:58 Go to previous messageGo to next message
jooks is currently offline jooks
Messages: 21
Registered: December 2009
Location: sweden
Junior Member
Thanks for the answer! 1n914 it will be Smile

Mod schematics would be awesome! I´m very impressed and greatful that you run your business like this. Not many share their work this way. Very inspiring!

Many thanks!
Report message to a moderator
Re: Enclosure depth? [message #2450] Mon, 15 February 2010 14:26 Go to previous message
dann is currently offline dann
Messages: 829
Registered: December 2002
Location: Austin TX
Senior Member
OK, i finally posted the schematic to the trigger input mod on the bendmatrix wiki page:
http://www.commonsound.com/kits/doku.php?id=commonsound:bend matrix
Report message to a moderator
Previous Topic:MIDI SYNC IN / tempo implementation question
Next Topic:this is going to be sick!
Goto Forum:
  


Current Time: Sat May 25 11:26:48 EDT 2013
.:: Contact :: Home ::.

Powered by: FUDforum 2.6.6.
Copyright ©2001-2004 FUD Forum Bulletin Board Software