commonsound forum: Tremulus Lune & Panneur => tremulus with a expression input?

commonsound

kits ... forum ... about us ... contact ... license ... 4ms Pedals

Members

FUDforum help

Home

Building How-to » Tremulus Lune & Panneur » tremulus with a expression input?

Show: Today's Messages :: Unanswered Messages :: Show Polls :: Message Navigator

E-mail to friend

tremulus with a expression input? [message #567]

Sat, 29 November 2003 18:33

shoegazersnotdead
Messages: 1
Registered: November 2003

Junior Member

hi i was wondering how hard it would be to mod the tremulus pedal with an expression pedal insert to control the rate of the tremolo i dont know if this has already been done or if it cant be done just curious.let me know if anyone knows if this can be done .

Report message to a moderator

Re: tremulus with a expression input? [message #570]

Sun, 30 November 2003 15:21

dann
Messages: 829
Registered: December 2002
Location: Austin TX

Senior Member

try this..

http://commonsound.com/other/genmods.pdf

Report message to a moderator

Re: tremulus with a expression input? [message #2699]

Sun, 17 July 2011 17:28

Grazioso
Messages: 2
Registered: July 2011

Junior Member

Hi!

Question about the depth control via expression pedal:

I use a moog ep-2. works wonderful for rate control, but since depth pot is such a low value there is is no change in most of the way of the pedal, but almost at the toe position it suddenly kicks in 100%.
i tried hanging in a parallel resistor (actually a pot so i could try more values...) but i did not get it right?!
can someone give me a tip (,or two)?

and another question:
i want to control rate and (if i get the values right) depth with extern CV from a synthesizer, or whatever.
i could not find a point where i can control these parameters directly with CV (but i think i found a CV point for the "to add" mod). are there such points for rate and depth, or do i have to use vactrols, or led ldr units? and if yes which ones work best?
has anyone anwers to all my questions?

thanks + servus from austria Wink

Report message to a moderator

Previous Topic:	LFO output?
Next Topic:	LED that does not pulse

Goto Forum:

-=] Back to Top [=-

Current Time: Wed May 22 18:47:14 EDT 2013

.:: Contact :: Home ::.