commonsound forum: Tremulus Lune & Panneur => Strange Lune Issue

commonsound

kits ... forum ... about us ... contact ... license ... 4ms Pedals

Members

FUDforum help

Home

Building How-to » Tremulus Lune & Panneur » Strange Lune Issue

Show: Today's Messages :: Unanswered Messages :: Show Polls :: Message Navigator

E-mail to friend

Strange Lune Issue [message #2905]

Fri, 01 June 2012 13:48

theviper21
Messages: 1
Registered: June 2012

Junior Member

So I built my Lune using a board from 4ms, but I am having a strange issue with it. LED seems to be working fine and changes based on the speed knob, but even when it's dialed up all the way it still doesn't blink very fast. At any rate, I think the main problem is that it's just not going fast enough which is why it sounds very strange to me.

Sound works fine in bypass and the gain knob works fine, so I am suspecting the audio section works alright.

Any suggestions on where I can start looking?

I am using a VTL5c2.

Report message to a moderator

Re: Strange Lune Issue [message #2964]

Sun, 21 October 2012 19:22

dann
Messages: 829
Registered: December 2002
Location: Austin TX

Senior Member

Hmm... maybe it's as simple as the value of the resistor that limits the maximum speed? Should be a 2.7k resistor, at least on the 4ms PCB version 2.4.x

Or it could be the wrong value for the LFO capacitor, it should be 10uF, so check that.

Report message to a moderator

Previous Topic:	Tremulus Lune common questions READ ME FIRST!
Next Topic:	tremulus questions

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 07:32:39 EDT 2013

.:: Contact :: Home ::.