commonsound forum: Tremulus Lune & Panneur => Different trimpots in panneur

commonsound

kits ... forum ... about us ... contact ... license ... 4ms Pedals

Members

FUDforum help

Home

Building How-to » Tremulus Lune & Panneur » Different trimpots in panneur

Show: Today's Messages :: Unanswered Messages :: Show Polls :: Message Navigator

E-mail to friend

Different trimpots in panneur [message #2656]

Wed, 13 April 2011 10:27

Oliver
Messages: 1
Registered: April 2011

Junior Member

Hello everyone,

I just bought an older Stereo Panneur (I did not build it myself, I am just trying to set it right). It was built in about 2003 so there are no gain knobs on the outside. I am just trying to have an reasonable output volume so that I can switch the effect on and off.

So I was adjusting those two trimpots on the inside and I noticed that the trimpot for the right channel can be adjusted to have a lot of gain (like two times louder than the bypass signal) while the left one goes from totally silent to about 2 times quieter than the bypass signal.

Does that necessarily mean that the trimpots have different values? What would be the easiest way to give the same range to both trimpots (higher gain would be perfect).

Thanks.

Report message to a moderator

Re: Different trimpots in panneur [message #2657]

Mon, 18 April 2011 03:12

dann
Messages: 829
Registered: December 2002
Location: Austin TX

Senior Member

IT could be the trimpots, or more likely it's the photocells and/or the angle of the LED shining on the photocell. Play with those a bit and you should be able to get whatever volume range you want

Report message to a moderator

Previous Topic:	Tremolo almost working (speed knob has no effect)
Next Topic:	Panneur Output Volume

Goto Forum:

-=] Back to Top [=-

Current Time: Wed May 22 21:28:52 EDT 2013

.:: Contact :: Home ::.